8
Instructions for use as a ”Group II” car safety seat (from 15
to 25 kgs)
1.
Step1.
The Basic wedge must be in position A when used forward
facing.
2.
Step 2.
Fasten the Child car seat in forward facing position on either the
passenger or rear seat of your car using the 3 point belt system which is
installed in the car.
3.
Step 3.
Separate the safety belt from the conection component, which is
placed behind the backpart of the safety seat. (Fig. 8)
4.
Step 4.
Sit the child on the car seat, pull out of the seat belt, thread the
shoulder harness ofthe seat belt under the oxter through bellyband, then
through the guiding hole, the through the safety guiding hook and
attache to belt buckle, complete. (Fig. 9).
IMPORTANT-DO NOT USE FORWARD FACING BEFORE THE CHILD’ S
WEIGHT EXCEEDS 9 kgs.
WARNING:
The forward facing position in group 1 can only be done if the child has
reached a weight over 9 kgs.
Your child seat can only be fitted into the front passenger seat of a car
with a lap and diagonal seat belt the child seat and without an airbag. Do
not use any load bearing contact points other than those described in
the instructions and marked on the child restraint.
The vehicle seat buckle is not positioned in or in front of the specified
belt guide.
Summary of Contents for Navi Safe
