juju Navi Safe, User Manual

Page: 9 / 34

9
Securing your child into the safety seat

Place the child into the safety seat and position the attached safety
harness.
 Fasten the buckle (G) byjoining the two parts of the belt (E and F)
together, until a click is heard (Fig 6/a). To strongly tighten the safety
harness, the child car seat is equipped with a central belt system (H) :it
means that, if you pull on the belt of the front, the harness system is
tightened. To loose the belt, just press the metallic button with on hand
and with the other hand, simultaneously, pull on the harness system
towards you. (Fig 6/ b)

Make sure that the harness system is not twisted or jammed
somewhere.
Altering the position of the harness system depending on
your child's weight
 In the back of the safety seat, there are 3 pairs of holes, which can be
used to adjust the shoulder straps to suit your child's weight (Fig. 7/a).
The lower holes are suitable for children up to a weight of 6 kgs.
The middle holes are suitable for children between appr 6 to 12 kgs.
The upper holes are suitable for children between appr 12 to 18 kgs
 The pairs of holes should not be lower than the child's shoulders, when
the child sits in the safety seat.
 To change the height position of the harness belt, you must separate it
from the connection component (L), which is placed behind the back
part of the safety seat.

Pass the safety belt through the required holes and join it at the
connection component (L).
 Make sure that the harness system is not twisted or jammed
somewhere.