18
19
JBP-RR-MANUAL |
©
2022 JUICED BIKES
JBP-RR-MANUAL |
©
2022 JUICED BIKES
a blue color and the battery pack will display the current
charge status. After power up, the battery’s 5 bar display
will turn on momentarily showing the current charge level.
A quick press of the power button will again show the
charge status momentarily.
Fig. 14 - Battery Power Button
2.
You can now install the battery pack onto the bike. Be sure
to remove the keys after installing and to verify the battery
pack is locked securely.
3.
Press and hold the LED display mode button for 3 seconds
to turn on the bike. The LED display panel will turn on and
indicate the battery’s charge level and selected pedal assist
level.
Fig. 15 - Mode Button
4.
Pushing the Mode button once will cycle the pedal assist
from P0 to P4 and then jump back to P0.
5.
When the bike starts moving, the display will switch from
displaying the Pedal Assist Mode to showing the current
speed of the e-bike. The display will return to showing the
assist level when the e-bike stops for a few seconds.
BASIC LED MODES
P0:
No assist, only the throttle will work
P1, P2, P3, P4:
Power output levels (all modes have a max speed
of 20mph)
Fig. 16 - Modes
THROTTLE OPERATION
Use the throttle and pedal assist at the same time or you can
just use the throttle feature to ride the e-bike. The throttle
control is located on the right-side handlebar next to the LCD
screen.
To use the throttle feature:
1.
Turn on the battery and the LED display.
2.
Set the LED to the desired setting. If you select “P0,” the
pedal assist control system is unavailable.
3.
Rotate the throttle control to increase the e-bike speed.
READING THE BATTERY PACK LEVEL
The LED display indicates the battery pack’s voltage. The
voltage can vary greatly depending on a variety of conditions.
Fig. 17 - LED Guide
The voltage will decrease temporarily when using the throttle
and/or pedal assist. The voltage may drop when going uphill
regardless of the charge state. This is normal operation. The
voltage will be lower if the battery pack has been in a cold
environment.
To more accurately read the battery pack’s charge state, let off
the throttle. The display lights will stabilize after 1 second to
indicate the battery pack’s level.
When the battery pack level is low and it reaches:
•
2 Bars - Recharge battery pack soon. Select a lower pedal
assist level.
•
1 Bar - Stop using the throttle; recharge the battery pack.
UNDERSTANDING THE BATTERY PACK RANGE
All electric bicycles have a riding range that can vary greatly
depending on riding style, terrain, tire pressure, temperature,
payload and wind. After a few rides, you will get a sense of the
electric bicycle’s range capability.
FACTORS THAT WILL DECREASE YOUR RANGE
•
Rapid accelerations using the motor
•
Uphill riding
•
Heavy payloads
•
Headwinds
•
Underinflated tires
•
Extreme hot or cold weather
OPERATION - BASIC LED
OPERATION - BASIC LED
