manualshive.com logo in svg

JUICE GOOSE iP1520, Owner'S Manual

Share
Download
JUICE GOOSE iP1520 Owner'S Manual Download Page 16

 

 

I’VE FOGOTTEN MY USERNAME/PASSWORD. 

 

The only way to fix this issue is to do a factory reset of the unit as detailed be-
low. 
 

FACTORY RESET ALL VALUES 
 

The iP1520 can be returned to it’s default firmware values by pressing a clearly 
marked  button on the iP1520 control board.  This will also reset the IP and 
RS232 to their default settings of IP: 192.168.1.77 and Baud rate 19200 and 
enable the DHCP feature.  
 

WARNING: The iP1520 needs to be powered on to perform the factory 
reset, be careful to only touch the factory reset button and ideally use a 
pencil to press it. There is a risk of shock if you touch anything else in-
side the iP1520. 
 

To perform the factory reset, remove the top chassis cover by removing all 
screws on the tops of each side of the chassis and lifting the top. Press the 
“Reset” button and hold it for 10 seconds. The network LED will be lit solid. 
When the LED goes out the reset is complete. Replace the top and reinsert the 
screws. At this point, when power is returned to the unit and network connection 
restored the setup procedure can be followed as if the unit was being used for 
the first time. See the “Quckstart” and/or “Setup Detail” sections of this manual. 

 
 

 

Page 15 

Summary of Contents for iP1520


















Reviews:

No comments

Brands by name

Popular brands

Load more brands