20
JUDO QUICKSOFT-DUO
Maintenance
7.
Maintenance
ATTENTION
(see chapter “Safety information and
dangers due to non-compliance”)
Always observe the chapter on “Intended
Use”!
7.1
Cleaning
ATTENTION
(see chapter “Safety information and
dangers due to non-compliance”)
Only use clear, clean drinking water to
clean the housing.
Domestic all-purpose cleaners and glass
cleaners can contain up to 25% solvents or
alcohol (spirits).
These substances can chemically attack the
plastic parts, which can lead to brittleness or
even fractures.
Such cleaners must therefore not be
used.
8.
Warranty and Services
In order to comply with the legal warranty
claim, according to DIN 1988, Part 8, it is
necessary that the owner/user "carry out an
inspection at least every 2 months." De-
pending on the water volume consumed, the
corresponding salt consumption must be
regularly monitored. If necessary refill the
regenerating salt (only use quality according
to DIN EN 973). Hygienic care is required
when refilling salt. For example, the salt
packages should be cleaned before use so
that contaminations cannot get into the salt
solution container. The regenerating salt
must be tipped directly from the opened
package into the salt solution container.
Ensure that the salt solution container is not
overfilled and that it is carefully closed again
at the end of the work. Part packages are to
be avoided. The salt may only be stored in
clean and dry rooms. A service is to be car-
ried out by a qualified, skilled service firm of
the manufacturer …"at least"… annually,
half-yearly in jointly used installations …".
Regular servicing is indispensable in order
to continue to achieve a successful process
for many years after the unit is put into ser-
vice. In the building services sector this is
covered by DIN 1988, Part 8.
A servicing agreement is the best way to en-
sure a good operating function beyond the
warranty period.
Wherever possible, the regular servicing
work and supply with consumables and
wearing materials, etc. should be carried out
by the specialist trade or the factory’s cus-
tomer service department.
The service-label fixed to the device
should be marked by the plumber after
the mounting of the device and indicates
the date of the service that will take place
next.
Abb. 11: Service label
