8
JUDO JUKO-LongLife
Installation
The built-in rotary flange for the domestic
water station is supplied with bayonet drill
holes. The necessary seals and screws for
this domestic water station have already
been mounted.
Do not unscrew the screws!
–
Insert the four flange screws in the
bayonet drill holes on the built-in rotary
flange (see fig. 2 II).
–
Turn the domestic water station in a
clockwise direction as far as it will go
(see fig. 2 II).
–
Tighten the four flange screws.
ATTENTION
(see chapter “Safety information and
dangers due to non-compliance”)
The section of the profiled flange gasket
must point towards the built-in rotary flange.
Failure to observe this can lead to leaks and
water escaping. This can in turn cause water
damage to the house and its installations.
4.2
Examples for installing the water treatment devices
Select the torque (approx. 4 Nm) so
that the gasket closes and the do-
mestic water station is not damaged
or strained!
Fig. 3: Built-in rotary flange
Profiled flange gasket
Fig. 4:
A typical combi system with open vented hot water storage tank
