6
JUDO FIMAT
Intended use
2.
Intended use
The installation and operation of the filter is
subject to the following existing national
regulations.
In addition to the operating instructions and
the obliging regulations concerning accident
prevention that exist in the country of opera-
tion and the location of use, the established
technical regulations concerning safe and
professional work, should also be observed.
The water to be filtered must possess
quality of drinking water!
It is absolutely essential that the manufac-
turer / supplier will be consulted prior to any
operation of the device using water of a
different quality, respectively with water that
contains additives.
This filter is suitable for use in cold drinking
water up to a maximum ambient tempera-
ture of 30 °C (86 °F).
The filter has been developed and manufac-
tured using state of the art technology and
the established safety regulations in
Germany.
The filter may only be operated in accor-
dance with the manufacturer’s specifica-
tions. Any other operation or operation
beyond the specified use, is not in accor-
dance with the manufacturer’s specifica-
tions.
Additional dangers may result in the event of
the device not being operated in accordance
with the manufacturer’s specifications and
non-observance of the danger symbols or
safety instructions. The manufacturer /
supplier cannot be made liable for any
damages caused by these additional
dangers. The operator is responsible for
these risks.
The use of the device in accordance with the
customer’s specifications includes the
observance of the operating instructions.
The manufacturer / supplier should be
consulted prior to any operation of the filter
other than in the operational areas stated in
these operating instructions.
The filter may only be operated in a techni-
cally faultless condition, in accordance with
the manufacturer’s specifications and the
stated safety and danger relevant instruc-
tions and under observance of the operating
instructions!
Any functional defects are to be removed
immediately!
Due to the large filter area of the backwash
protective filter, the filter can also be used in
the commercial and industrial sectors for
filtering water of a greater content of solid
matter.
The following table shows the standard
values for some realms of application.
2.1
Water pressure
The water pressure should be between
22 psi (150 kPa) and 150 psi (1034 kPa).
The water pressure must not fall below
22 psi (150 kPa) as otherwise the back-
washing can be impaired! If the filter is not
backwashed regularly a pressure loss can
result and this can impair the filter function.
Drinking
water
max.
20 m³/h
max. 88 gpm (US.liq.gal.)
max. 73 gpm (Imp.gal.)
Air
washer
max.
15 m³/h
max. 66 gpm (US.liq.gal.)
max. 55 gpm (Imp.gal.)
Well
water
max.
10 m³/h
max. 44 gpm (US.liq.gal.)
max. 37 gpm (Imp.gal.)
Cooling
water
max.
10 m³/h
max. 44 gpm (US.liq.gal.)
max. 37 gpm (Imp.gal.)
Car-wash
plants
max.
5 m³/h
max. 22 gpm (US.liq.gal.)
max. 18 gpm (Imp.gal.)
Summary of Contents for FIMAT JFXL-M 1 1/2
Page 3: ...JUDO FIMAT 3 ...
