Judo FERROCLEAN, Installation And Operating Instructions Manual

Page: 7 / 27

Installation and operating instructions: JUDO FERROCLEAN sludge separator JFS
2 ½” – 8”
All rights reserved. JUDO Wasseraufbereitung GmbH
© JUDO Wasseraufbereitung GmbH
Postfach 380

D-71351 Winnenden
Translation into foreign languages and reproduction, even in excerpt form, is only permitted with special
approval.
Tel. +49 (0)7195-692-0

Fax +49 (0)7195-692-188
Revision level: 20.04.2017
E-Mail: info@judo.eu

judo.eu
7
1.3.2 System water analysis
To check the system water status in a heating or cooling system, a system water
analysis must be carried out!
It should be noted that the oxygen content can be measured in the system water only
locally, laboratory evaluations are useless and inconclusive!
In order to obtain a statement about the state of the system water, the following values usually have to be
analyzed:

pH Value

Conductivity

Oxygene content

Percentage of dissolved iron / total iron

Possible degree of hardness
1.4 Warranty
The warranty is valid in accordance with our general terms of sale and delivery only if

The JUDO sludge separator is used solely for its intended use and its system components are not
opened, tampered with or incorrectly treated in any other way,

Safety guards are used and these are not manipulated or removed,

The operating conditions correspond to the technical specifications,

Inspection and maintenance are performed according to DIN EN 806-5 2012,

Repairs are only performed with original spare parts by JUDO customer service or authorised
technical personnel.
All work must only be performed by qualified and authorised technical personnel.
1.5 Type label
The type label is located on the front side of the steel tank (see Chap. 3.3)
So that we can more quickly process questions or orders, please specify the type label data.
The optional insulation completely encapsulates the steel container. The insulation must
be removed to be able to read the type plate!