Installation and operating instructions: JUDO FERROCLEAN sludge separator JFS
2 ½” – 8”
All rights reserved.
JUDO Wasseraufbereitung GmbH
© JUDO Wasseraufbereitung GmbH
Postfach 380
D-71351 Winnenden
Translation into foreign languages and reproduction, even in excerpt form, is only permitted with special
approval.
Tel. +49 (0)7195-692-0
Fax +49 (0)7195-692-188
Revision level: 20.04.2017
E-Mail: [email protected]
judo.eu
23
JUDO Water Treatment Inc.
Address:
240 Lesmill Road
Toronto, ON M3B 2T5
Canada
Phone:
(416) 441-1556
Toll-free (Canada/USA)
(866) 451-5836
Fax:
(416) 391-4273
Toll-free fax (Canada/USA)
(877) 761-3335
Email:
judo-online.com
Installation company:
5.5
Removal from service
The JUDO FERROCLEAN sludge separator must be properly flushed (see Chap. 5.3.1 or 5.3.2).
Cluse the sludge shut-off valve (7) after flushing.
Close the onsite shut-off valve (1+2) on the inlet and outlet side of the JUDO FERROCLEAN sludge
separator.
Open the on-site shut-off valve in the bypass and switch on the onsite circulation pump.
6
Inspection, maintenance, service
Warning
Before cleaning, maintenance or repair work ensure that the JUDO FERROCLEAN
sludge separator is hydraulically depressurised!
Warning
Danger due to hot surfaces or danger due to scalding!
Use protective gloves!
Servicing and maintenance must only be performed by JUDO customer service or
authorised technical personnel and while adhering to the applicable safety conditions!
Orderly and systematically performed servicing is the underlying requirement for a fault-
free long service life of the JUDO FERROCLEAN sludge separator!
The attached maintenance protocol (see Chap. 6.4) serves as a copy template for the creation
and proper management of an ongoing maintenance book!
