Judo BIOSTAT 25 TGA, Installation And Operating Instructions Manual

Page: 14 / 28

14 JUDO BIOSTAT 25 TGA
Operation
5.2 Setting the cleaning interval
Factory-adjusted setting: 1321 gal (5 m³)
(see chapter “Cleaning / flushing”)
– Remove the panelling of the water treat-
ment device (see chapter “Mounting of
the panelling”).
– Set the cleaning interval via the contacts
1 to 4 of the electrical circuit (see chapter
“Cleaning / flushing”).
For setting only one of the contacts 1 to 4
may be positioned to the left.
In case of incorrect settings the circuit
responds with an acoustic signal tone (see
chapter “Fault”).
– Remount the panelling of the water treat-
ment device (see chapter “Mounting of
the panelling”).
5.3 Description of its function
1 Control lamps
2 Manual pushbutton
3 Type plate
4 Panelling
5 Cleaning motor
6 Flushing motor
Disconnect the power supply from
the socket.
1321 gal
(5 m³)
2642 gal
(10 m³)
5283 gal
(20 m³)
10.567 gal
(40 m³)
Tab. 1: Setting the cleaning interval
Plug the power supply into the
socket!
1 2
3
4 5
6
7 8
O
PEN
1 2
3
4 5
6
7 8
O
PEN
1 2
3
4
5 6
7 8
O
PEN
1 2
3
4
5 6
7 8
O
PEN
Fig. 8: Description of its function
1
2
3
5
6
4
BST 25 TGA