©Jules Richard Instruments
20
Alarm LED (red) is on
during 10”.
+
T° OK: green LED is
on during 10”.
+
j)
Auto control or top zone
The type of action depends on the SPY RF configuration.
TOP ZONE = Transport mode
and
AUTO CONTROL = Storage mode
This function enables you to customise an action of measurement check-up. You just have to press shortly on
the pushbutton.
The action is recorded and will appear on the curve when you process the data with your software Sirius.
k)
Leds and pushbutton actions fonctionning
The green led is on 2’’ when the measurement strarts and then flash each 1’ in recording mode.
Specials fonctionning regarding the recorder using mode
Device set up in storage mode
Pushbutton pressing
Mode
< 5"
5’’> pressing <10’’
OFF
-
The 2 leds are on and
flash at the same time.
Waiting setup
Red led 2"
-
Starting measurements
Pushbutton
Green led 2" = begining of
measurements
-
Delayed (date & time)
-
-
Immediatly
- -
Mesure
Green led 10" = auto control
-
Device set up in transportation mode
Pushbutton pressing
Mode
< 5"
5"<appui>10"
Off
-
The 2 leds are on and flash at
the same time
.
Waiting setup
Red led 2"
-
Starting measurements
Pushbutton
Green led 2" = begining of
measurements
-
Delayed (date & time)
The 2 leds are on and flash at
the same time
= Waiting for
starting measurements
Immediatly
-
The 2 LEDs are on and then
flash alternatively
= ending
measurements
Mesure
Green led 10" = Top zone
The 2 LEDs are on and then
flash alternatively
= ending
measurements
Summary of Contents for SPY RF Tc
Page 1: ...Manuel d utilisation User manual SPY RF Tc 06252 A...
Page 23: ...Jules Richard Instruments 23...
Page 24: ......
