©JRI
5
V.
USE
a)
Stop
When you receive it, your SPY RF is stopped. Only the time clock is active. It can neither emit nor receive anything.
b)
Start
To start your SPY RF AIR, please press between 5
and 10” on the button:
- the 2 LEDs are on and flash at the same time
- all the display segments are also on
- SPY RF is now in waiting mode
Remark: If you press
>10’’ => no effect => remains
off
c)
Waiting mode
The SPY RF AIR is ready to receive a configuration or to start a new recording session.
The symbol “
Halt
” is on: no measures in progress.
Use the pushbutton to start.
d)
Configuration
SPY RF configuration is done from the Sirius
software and then transferred into your SPY RF
by radio frequency.
e)
Measurement start
The SPY RF has 2 starting mode:
automatic start
manual start
f)
Automatic start
Your SPY RF starts recording:
automatically when the configuration is transferred,
at a programmed date and time:
Working LED (green):
2’’ => starting measurements
then flashes every 1 minute
dd / mm / yy
hh / mm / ss
Working LED (green):
2’’ => starting measurements
then flashes every 1 minute