background image

©JRI  

 

I.

 

INTRODUCTION 

Congratulations, you own a Mini SPY RF GREEN! This device is equipped with 1 internal sensor. It enables you 
to record the ambient temperature and to transfer wirelessly the recorded data by radio frequency to a PC. 
 

a)

 

Equipment  

 

1 or several Mini SPYRF GREEN 

 

1 user manual 

 

b)

 

Symbols 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Do not use the unit in conditions other than those described in the specifications 
Risk of fire or explosion in the event of misuse: 
- Recharge the battery 
- Short-circuit the battery 
If the unit is used in a way that is not specified by the manufacturer, the 
protection provided by the equipment may be impaired. 

 

II.

 

INSTALLATION RECOMMANDATIONS 

The Mini SPY RF GREEN is a recorder of  physical parameters able to  communicate wirelessly with the 
operating software SIRIUS.  
The wireless communicatin is based on radio frequency. As we are daily in contact with it (radio, TV…) it is easy 
to think that it always works. This true if basic rules on recorders positioning are respected concerning because 
wireless communication is subject to perturbations.  

 

RECYCLING : do not throw in a rubbish dump or in a domestic waste container. Comply to the regulation to 
throw away the device. 

 

CE MARKING : this equipment is certified to comply with the European regulation for the electric security, 
inflammability, disturbing radiation emission and immunity to surrounding electric disturbances. 

 

FCC ID :W45

 

10255 MiniSpy Green Internal probe only  

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this 
device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation 
In accordance with FCC requirements, changes or modifications not expressly approved by JRI could void the 
user's authority to operate this product. 
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant 
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential 
area is likely to cause harmful interference in which case the user will be required to correct the interference at 
his own expense.

 

Summary of Contents for Mini SPYRF Green











Reviews: