ProNav Norway – a
Company
page 61
Rev.1
10.02.2020
Serial Commands
,
Continued
Serial
commands
,
continued
Table C-1: Serial commands (continued)
Command
Description
$JMODE,GPSONLY,N
O
Multi-GNSS mode
$JRESET
Reset unit’s configuration to firmware defaults
Note:
$JRESET clears all parameters. For the
V200s you will have to issue the $JATT,
FLIPBRD,YES command to properly redefine
the circuitry orientation inside the product
once the receiver has reset. Failure to do so
will cause radical heading behavior.
You can also issue the $JRESET command with
an optional field as follows:
•
$JRESET,ALL does everything $JRESET does,
plus it clears almanacs
•
$JRESET,BOOT does everything $JRESET,ALL
does, plus clears use of the real-time clock at
startup, clears use of backed-up ephemeris
and almanacs, and reboots the receiver
when done
$JSAVE
Save session’s configuration changes
