ProNav Norway – a
Company
page 35
Rev.1
10.02.2020
Pole-mounting the V200s
Pole-mounting
the V200s
Complete the following steps to pole-mount the V200s:
Table 2-4: Pole-mounting the V200s
Step
Action
1
Determine the desired location and proper orientation for
the V200s. See “
” for information on
determining the desired orientation.
2
Thread the jam nut onto the 1-inch pole, then thread the
pole mount.
Figure 2-14: Pole mount with jam nut loosely threaded
Do not tighten the pole mount to more
than 4 lbs-ft.
3
Thread the cable either through the hollow pole or through
the opening in the pole mount.
4
Connect the cable to the V200s, then secure the pole mount
to the V200s using the supplied mounting hardware. Tighten
to a torque of 8 - 10 lbs-ft. The maximum thread depth
engagement must be no more than 0.50 in!
Figure 2-15: Pole mount secured to V200s
Continued on next page
