JRC JLN-205MK2, Quick Reference

Page: 58 / 218

4-28
Main menu
Explanation Default
Sub-menu1
Sub-menu2
Sub-menu3
5> SENSOR Setting the GPS Sensor
GPS MODE Select the GPS mode
【
AUTO, GPS alone, Beacon, SBAS
】
AUTO
FIX MODE Select the fix mode AUTO
【 AUTO,2D,3D 】
ELV MASK Select the elevation mask
【
5
～
89 degrees
】
5 deg
HDOP Selecting the HDOP
・ Positioning is only performed if HDOP is lower than
the set value
【
4,10,20
】
4
SMOOTHING
Smoothing can be applied to measured positions,
speeds, and courses.
・
The higher the smoothing value, the smoother the
results will be, but the greater time lag. Conversely, if
the smoothing value is set low, a great number of
changes will occur, but there will be little time lag
-
POSITION Smoothing can be set for position
【
0
～
99sec
】
10
秒
SPEED Smoothing can be set for speed
【
0
～
99sec
】
10
秒
COURSE Smoothing can be set for course 【 0 ～ 99sec 】 10 秒
RAIM ACCURACY Set the RAIM accuracy level
【
100,50,30,10,OFF
】
100m
INITIALIZATION Initializing the GPS sensor
－
LATITUDE Set the initial position (Latitude)
－
LONGITUDE Set the initial position (Longitude) －
HEIGHT Set the anntena height
－
DATE
Set the date
・
Enter the current date in UTC
－
TIME
Set the time
・ Enter the current time in UTC
－
SEND Perforing the initilization
－
BEACON Setting the DGPS positioning for beacon
－
STATION SELECT
Set the beacon station selection method
【 AUTO,MANUAL 】
AUTO
FREQUENCY
Set the frequency when station selection is set to
manual
－
BIT RATE Set the bit rate when station selection is set to manual
－
SBAS Setting the SBAS positioning
－
SBAS SEARCH
Select the SBAS satellite selection method
【 AUTO,SBAS satellite number selecable 】
AUTO
TYPE 0 INFO
Set whether type 0 information (test broadcast) data is
used
【
ON(USE),OFF(Not USE)
】
OFF
RANGING
Set whether SBAS satellite is used for positioning in
the same way as the GPS satellite.
【
ON(USE),OFF(Not USE)
】
OFF
8> BEACON
DISPLAY
Displaying the beacon information
【
ON,OFF
】
ON