JRC JHS-800S, Instruction Manual, Page: 120 / 156

Settings & Registrations
5-17
5.6.3 Setting the controller status when external power is turned on
When the external power supply is turned on to the main unit, set how to make the state of the
controller. Set it to ON when turning on the controller power supply, and set it to OFF to set the
controller power supply to the previous state. This function is only for the controller. The
[INTERLOCK] button is not displayed on the main unit.
■
Procedure
■
1
11
.
..
In the main menu, touch the [SETUP] →[DISP SET]
→
[INTERLOCK] buttons.
The factory setting is default “ON”.
2
22
.
..
Use the [+]/[-] buttons to select them.
3
33
.
..
Finally, touch the [ ✓ ] button to register.
Note