JRC JHS-800S, Instruction Manual, Page: 116 / 156

Settings & Registrations
5-13
5.5.2 Disabling receiving alarms for routine and safety calls
The aural alarm for routine and safety calls can be disabled as follows. The factory setting is
default “ON”
■
Procedure
■
1
11
.
..
Touch [RX ALARM] to disable the receiving of alarms.
2
22
.
..
Use the [+]/[-] buttons to turn it OFF.
3
33
.
..
Finally, confirm the changes with the [ ✓ ] button.
5.5.3 Disabling receiving alarms for routine and safety calls
The following describes the procedure to set the condition so that an urgency all ships call
containing the additional subject of either "Medical transportation" or "Neutral nationality" can be
sent. It is useful for the situation when sailing dangerous waters such as in areas of political
instability, and needed to inform receivers of the additional information if any of the following apply.
・
Own ship is performing medical transportation and protected under the 1949 Geneva
Convention.
・
Own ship is of neutral nationality in accordance with ITU resolution 18 (Mob -83).
Additionally, note that this setting returns to the default setting (OFF) if the power is turned off.
■
Procedure
■
Turn either MDCL USE (medical use) or NEUT USE (neutral use) to ON when making an
urgency call.
・
Medical use: [MENU]→[SETUP]→[DSC OPE]→[MDCL USE]
・
Neutral use: [MENU]→[SETUP]→[DSC OPE]→[NEUT USE]