JRC JHS-800S, Instruction Manual, Page: 104 / 156

Settings & Registrations
5-1
5. SETTINGS & REGISTRATIONS
This chapter describes the procedure for settings and registrations for the date and time
manually, the contact lists for DSC calls, advanced DSC settings, and other settings for
the equipment.
5.1 Date and time setting
Normally, the date and time are updated automatically if importing GPS information. But if
necessary, input these parameters manually as follows.
CAUTION
The time that is set here is the present time, and is not reflected in the time
in the POS/TIME (MENU>SETUP) menu (time for the position information
when the ship is in said position).
■
Procedure
■
1
11
.
..
In the main menu, touch the [SETUP] → [DATE&TIME]
buttons.
2
22
.
..
Display the page you want to set with the [<]/[>]
buttons. Show the items you want to set with the [↑]/[↓]
buttons, and then make changes using either the
[+]/[-] buttons or the [Edit] button.
➢
You can adjust the setting items in the following ranges.
• [1/2] DATE
DATE: Set the date.
TIME:Set the time.
• [2/2] DISP FORM
TYPE: Select the information shown on the status
display from below.
• "TIME, POS": Displays both the present time
and position.
• "TIME": Displays only the present time.
• "POS": Displays only the present position.
UTC/LT: For the time shown on the status display,
select either universal time coordinated (UTC)