JRC JHS-770S - Page 75 Instruction Manual Download

Page: 75 / 162

Operation

4-31

(3) Receiving an individual call (Type: Position request)

■

Procedure

■

The screen at right will be displayed, and
the alarm will sound.

The example message contains the following
information.

Format:

Individual

call

Caller’s

MMSI:

111222333

Type: Position

request

EOS:

ACK is requested.

Press the

CANCEL

key to stop the alarm

and display the screen at right. If possible to
respond immediately, press ENT.

If Automatic ACK is ON, the

acknowledgement will be sent
automatically without notice.

If having no position information

(unconnected to GPS and elapsed over
23.5 hours after inputting manually),
the message editing screen will be
displayed after selecting the OK/ACK.

(4)

Receiving an individual call (Type: Test)

■

Procedure

■

The screen at right will be displayed, and
the alarm will sound.

The example message contains the following
information.

Format:

Individual

call

Caller’s

MMSI:

111222333

Type: Test

EOS:

ACK is requested.

Press the

CANCEL

key to stop the alarm

and display the screen at right. If possible
to respond immediately, press ENT.

If Automatic ACK is ON, the
acknowledgement will be sent
automatically without notice.

Received safety message
Format

:Individual call

From

:111222333

Type

:Position RQ

EOS

:ACK RQ

[OK/ACK]

[Cancel]

Received safety message
Format

:Individual call

From

:111222333

Type

:Position RQ

EOS

:ACK RQ

Press CANCEL to silence alarm.

Note

Received safety message
Format

:Individual call

From

:111222333

Type

:Test

EOS

:ACK RQ

[OK/ACK]

[Cancel]

Received safety message
Format

:Individual call

From

:111222333

Type

:Test

EOS

:ACK RQ

Press CANCEL to silence alarm.

Note

Summary of Contents for JHS-770S -



































































































































































Search results

Summary of Contents for JHS-770S -

Reviews:

Related manuals for JHS-770S -

Brands by name

Popular brands

JRC JHS-770S -, Instruction Manual

Search results

Summary of Contents for JHS-770S -

Reviews:

Related manuals for JHS-770S -

Brands by name

Popular brands