JRC JHS-770S -, Instruction Manual

Page: 70 / 162

Operation
4-26
5
5
5
.
.
.
Start the safety broadcasting using the
handset.
When completed the communications, return
the handset to the cradle.
4.4.1.2 Individual calls (All modes RT)
When sending the safety individual call to a ship or coast station, note the difference described below
from the case of routine.
・ The menu is common for both ship and coast station.
・ Other than the address and the working channel, the type is needed to select.
・ Normally the CH16 by default is used.
■
Procedure
■
1
1
1
.
.
.
Press the
MENU
key, and through
hierarchical menus, select the 2.1.2 Specific
station.
The menu shown at right will be displayed.
If entered previously, the address will be
appeared as a default value
2
2
2
.
.
.
Press ENT to display the station list,
and select the desired station with the
jog dial.
The procedure is similar to that of routine calls,
except that the list shows together ship stations
and coast stations.
- The list can be registered in the
menu 9.4 Contact list.
- When inputting the MMSI manually,
press the CANCEL key to return
to the previous screen and input it
using the numeric keypad.
3
3
3
.
.
.
Press ENT.
The cursor will move to the Type.
2.1.2)Specific station
Address :[ ]
Type :[All modes RT]
Work CH :[16]
[ OK ] [Cancel]
2.1.2)Specific station
Address :[123456789]
Type :[All modes RT]
Work CH :[16]
[ OK ] [Cancel]
Station1 TIME 23:59(UTC)
POS 89ﾟ59'S
EXT 179ﾟ59'W
16
CH
SQL
CH70 CH
SW
[ITU]
Station list [ A ]
NAME MMSI
AAA ocean 123456789
ABB ocean
ABC ocean
ACC ocean
BBB ocean 222222222
333333333
444444444
555555555
Select the initial of the name.
A BCDEFGHIJKLMNOPQRSTUVWXYZ
Note