JRC JAN-701B -, Instruction Manual

Page: 150 / 564

3 Basic Operation of ECDIS 3-88
3.11.3
Wide Range View Screen (S-57/C-MAP Only)
You can display the wide view screen on the display panel. The buttons that were the wide view screen
section move to the upper part of the screen.
1) In the normal menu
Select [MENU] - [(6) Chart] - [(1) Multiview] - [(9) Wide Range View] in that order.
The wide range view screen appears in the display panel area.
In the wide range view screen, the currently displayed area is surrounded by the blue line.
If the same chart is displayed in multi view, the view 1 chart area will be surrounded by a blue
line and the view 2 chart areas will be surrounded with a red line.
To close the wide view screen:
Select [MENU] - [(6) Chart] - [(1) Multiview] - [(9) Wide Range View] in that order.
Then, the wide view screen disappears from the display panel and the buttons return to the original
place.
Wide view
Area currently displayed (Blue line)