RTU-292 Operations Manual
If the number is busy, the busy tones will be broadcast for approximately 5 seconds before the
RTU-292 terminates the call attempt.
Once the RTU-292 detects ringback, the RTU-292 begins a 30 second timer and waits for the
call to be answered. If this does not happen before the timer expires, the call attempt is
terminated.
7.5.6 After the Call Begins
The RTU-292 now enters its "Command Mode", meaning that the phone user may enter any of
the available DTMF commands from Table 3-1. The Inactivity Timer will now begin to run. If
this time expires (due to a lack of speech or other audio activity), the RTU-292 will give a
series of 3 short beeps as a warning. The radio caller or the phone user may initiate activity
within 5 seconds of the warning beeps to reset the timer. If neither user does so, the unit will
then terminate the call.
To terminate the call at any time, the radio user may enter
* #
at any time. The phone user may
also enter
* #
to hang up.
JPS Communications, Inc.
7-12
Summary of Contents for RTU-292
Page 10: ...RTU 292 Operations Manual This page intentionally left blank JPS Communications Inc 10 ...
Page 34: ...RTU 292 Operations Manual Figure 2 1 Outline Dimensions JPS Communications Inc 2 18 ...
Page 39: ...RTU 292 Operations Manual Figure 2 6 Interface Details JPS Communications Inc 2 23 ...
Page 112: ...RTU 292 Operations Manual Blank Page JPS Communications Inc 8 2 ...