2. Testing
Blood pressure cuff pressure automatically, automatic stop, please keep quiet when measuring.
If the cuff is not connected or cuff loose connection causes such as cuff pressure rise is unusual, the
blood pressure cuff at start-up pump inflatable after a certain period of time, will stop the pump work,
turn to wait for pressure, the screen shown above Err3. Please test cuff pneumatic connection state,
can press "memory" button to enter to view memory or press the "start/stop" button to turn it off.
Note: in the process of the pressure must not be arbitrary shaking body, otherwise, the
system will also to determine this for high blood pressure, and pressure again;
17
16
18
Unit Operation
Unit Operation
Unit Operation
4. Result Display
The screen will display measurements for systolic and diastolic blood pressure with voice
broadcast. A indicator representing the current measurement will appear next to the
corresponding WHO Classification.
Irregular Heartbeat Indicator
If the monitor detects an irregular heart rhythm two or more times during the measuring
process, the Irregular Heartbeat Symbol " "appears on screen along with
measurement results. Irregular heartbeat rhythm is defined as rhythm that is either 25%
slower or faster than the average rhythm detected while measuring systolic blood pressure
and diastolic blood pressure. Consult your physician if the Irregular Heartbeat Symbol
" " frequently appears with your test results.
Power Off
turn off the power itself about 1 minutes no operation in any mode.
The " START/STOP " button can be pressed to turn off the unit in any mode. The unit can
Note: Refer to Page 23~24 for detail WHO Blood Pressure
Classification Information.
Safety Precaution: If pressure in arm cuff becomes too extreme while testing,
press the " START/STOP " button to turn power off. The cuff pressure will rapidly
dissipate once the unit is off.
Unit Operation
15
Memory view and average view
In the main interface LCD screen all show self-checking, memory according to [memory] key value
view, see the first is the average of the last seven days, and then the seven days before the measurement
of mean and average in the afternoon in the morning, the last is the latest measurement data, and blood
pressure by pressing enter key memory value view. According to the average switching, press V return
on a liquid crystal display interface. On average, LCD shows average prompt "AVG", and display the
corresponding average blood pressure classification information and classification identification on
the morning of the afternoon.
1-2c
m
''
(0.4
-0.8
)
Testing
1. Power On
Under the main interface display, press the switch machine buttons, backlight automatically
open, 3 seconds after the show the most recent measurement values, continuous press switch
machine button can be skipped if the above two delay directly into the measurement.
HSD
Cuff loose Indicator
At the beginning of the measurement, when the cuff is properly worn, the " " icon will be
displayed, and when thecuff is loose, " " The icon will be displayed. When this happens,
please turn off the machine, adjust the cuff and measure again. If the " " icon is still
displayed, please check the cuff plugconnect with device correctly and measure again.
If it still cannot be resolved, please contact the seller or manufacturer.
Applying the Arm Cuff
1. Firmly insert air plug into opening located on behind side of monitor unit.
2. With sticky nylon section facing outward, insert end of cuff underneath metal ring
of cuff
3. Fasten cuff about
above the elbow joint. For best results apply cuff to
bare arm and keep level with heart while testing
.
1-2cm (0.4-0.8'')
.
a
b
Blood pressure cuff pressure in the process of blood pressure measurement can be made.
Armband internal pressure increases gradually, LCD real-time display the current pressure.
When detected pulse, LCD screen flashing symbols, and display the current pressure
corresponding to the heartbeat of cuff pressure value
Note: Do not speak, in the process of measuring twist arm, shaking body, etc., please keep
quiet state.
HSD: A detection algorithm of human are strained, when measuring blood pressure, it can be
through the human bodyMeasure blood flow rate to determine whether the body is in nervous
condition, suitability for blood pressure measurement. If the body is in nervous condition,
sphygmomanometer can remind and terminate the blood pressure measurement, the user should
be measured again after at least 5 minutes. If the normal leisure of the human body, blood pressure
will also remind and normal work and measured the blood pressure.
If you want to see other memory within the group, please user memory group set up in front of the
boot, specific operation as shown in the "system Settings" in " User memory group Settings ".
Memory Deletion
In the condition of main interface, press the [memory] key, enter the average interface. Through
user button to select the user, long press A button and V 15 seconds for user delete memory value.
Press A button to enter the average interface in the morning, in the morning the average interface,
can be long press A button
and V 15 seconds to delete all data.
Λ