JOYTECH BM 92 Owner'S Manual Download Page 2

Unit Illustration

6

Arm Cuff

Medium size cuff  (fits arm circumference: 22.0 cm -36.0 cm).

 If air is leaking from the arm cuff, replace the arm cuff with a new one. It is generally recomm

ended to have the cuff replaced timely to ensure correct functioning and accuracy. Please 

consult your local authorized Sejoy distributor or dealer. 

5

Safety Notice

3

Important Instructions Before Use

1. Do not confuse self-monitoring with self-diagnosis. Blood pressure measurements should

    only be interpreted by a health professional who is familiar with your medical history.

2. Contact your physician if test results regularly indicate abnormal readings.

3. If you are taking medication, consult with your physician to determine the most appropriate

    time to measure your blood pressure. NEVER change a prescribed medication without first

    consulting with your physician.

4. Individuals with serious circulation problems may experience discomfort. Consult your

    physician prior to use.

5. For persons with irregular or unstable circulation resulting from diabetes, liver disease,

    arteriosclerosis or other medical conditions, there may be variations in blood pressure

    values measured at the wrist versus at the upper arm. Monitoring the trends in your blood

    pressure taken at either the arm or the wrist is nevertheless useful and important.

6. People suffering from vascular constriction, liver disorders or diabetes, people with

    cardiac pacemakers or a weak pulse, and women who are pregnant should consult their

    physician before measuring their blood pressure themselves. Different values may be

    obtained due to their condition.

7. People suffering from arrhythmias such as atrial or ventricular premature beats or atrial

    fibrillation only use this blood pressure monitor in consultation with your doctor. In

    certain cases oscillometric measurement method can produce incorrect readings.

15. Product is designed for its intended use only. Do not misuse in any way.

16. Product is not intended for infants or individuals who cannot express their intentions.

17. Prolonged over-inflation of the bladder may cause ecchymoma of your arm.

18. Do not disassemble the unit or arm cuff. Do not attempt to repair.

19. Use only the approved arm cuff for this unit. Use of other arm cuffs may result in

       incorrect measurement results.

8.Too frequent measurements can cause injury to the patient due to blood flow interference.

9.The cuff should not be applied over a wound as this can cause  further injury.

10.

DO NOT 

attach the cuff to a limb being used for IV infusions or any other intravascular 

    access, therapy or an arterio-venous  (A-V) shunt. The cuff inflation can temporarily 

   block blood flow, potentially causing harm to the patient.

11.The cuff should not be placed on the arm on the side of a mastectomy. In the case of a 

     double mastectomy use the side of the least dominant arm.

12.Pressurization of the cuff can temporarily cause loss of function of simultaneously used 

     monitoring equipment on the same limb.

13.A compressed or kinked connection hose may cause continuous cuff pressure resulting 

     in blood flow interference and potentially harmful injury to the patient.

14.Check that operation of the unit does not result in prolonged impairment of the circulation 

      of the patient.

20. The system might produce incorrect readings if stored or used outside the manufacturer's

       specified temperature and humidity ranges. Make sure to store the blood pressure monitor,

       children, pets and pests are outside of accessible range. 

21. Do not use the device near strong  electrical or electromagnetic fields generated by cell 

      phones or other devices, they may cause incorrect readings and interference or become 

      interference source to the device. 

22. Do not mix new and old batteries simultaneously.

Safety Notice

Federla Commulcation Commission (FCC) Interference Statement

1.This device complies with part 15 of the FCC Rules. Operation is subject to the condition 

that this device does not cause harmful interference.

2.This device is verified to comply with part 15 of the FCC Rules for use with cable television 

service.

3.This device complies with part 15 of the FCC Rules. Operation is subject to the following two

 conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause 

undesired operation. Please note that changes or modifications not expressly approved by the 

party responsible for compliance could void the user's authority to operate the equipment.

4.This equipment has been tested and found to comply with the limits for a Class B digital

 device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This equipment generates, 

uses and can radiate radio frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this equipment does 

cause harmful interference to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the interference by one or more 

of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

 is connected.

Consult the dealer or an experienced radio/TV technician for help.

5.This equipment complies with radio frequency exposure limits set forth by the FCC for an 

uncontrolled environment.

6.This device must not be co-located or operating in conjunction with any other antenna or

transmitter.

Limits of the error of

the manometer

Reproducibility of the

BLOOD PRESSURE

DETERMINATION

Refer 202.12.1.102    IEC 80601-2-30 

Refer 201.12.1.107    IEC 80601-2-30 

7.Essential performance:

Electrosurgery

interference recovery

Refer 202.6.2.101      IEC 80601-2-30 

Monitor Unit

Arm Cuff 

Air Tube

Air Plug

LCD

 MEM  

"

 

Button

START/STOP   "

 

Button

"

 

Safety Notice

4

24. Do not mix battery types. Long-life alkaline batteries are recommended.
25. Remove batteries from device when not in operation for more than 3 months.
26. Dispose batteries properly; observe local laws and regulations.

27. Only use a recommended class II AC Medical approved adaptor which comply with 2MOPP, and pass 
IEC 60601-1, IEC 60601-1-2(or 

FCC

) standard  . An unauthorized adapter may cause fire and electric shock.

28.            Advising operator that Instruction manual/ Booklet must be consulted. 

29. Do not use the device during transport vehicles for influencing measurement accuracy such as patient transport in an 

ambulance or helicopter.

30. Contains small parts that may cause a chocking hazard if swallowed by infants.

31. Please align the polarities of each battery with the +ve and -ve signs imprinted on the battery housing when you replace the batteries .

32.Use of this equipment adjacent to or stacked with other equipment should be avoided  because it could result in improper operation. 

If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally.

33.Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer

 than 30 cm (12 inches) to any part of the unit, including cables specified by the manufacturer. Otherwise, degradation of the performance 

of this equipment could result.

34.the blood pressure monitors equipped with bluetooth(BT) module is only  transmit historical blood pressure (BP) from the subject 

device to a user-supplied digital device, and is not intended for active patient monitoring.

23. Replace batteries when Low Battery Indicator

          

appears on screen. Replace both batteries at the same time.

WARNING SIGNS AND SYMBOLS USED 

Keep off Sunlight

Type BF Equipment

Discard the used product to the recycling 

collection point according to local 

regulations

Instructions For Use MUST be Consulted

Keep Dry

The Bluetooth® Smart word mark and logos are 

registered trademarks owned by Bluetooth SIG, 

Inc. and any use of such marks by JOYTECH 

Healthcare Co.,Ltd. 

MR

IP21

 

Magnetic Resonance unsafe

    21 indicate dust proof and waterproof grade. Number 2 

indicate that Protected against solid foreign objects 

of 12.5 mm and greater; Number 1 indicate that Protection 

against vertically falling water drops .

IP

 +  

       "  "

 

Button

 -  

       "  "

 

Button

       " 

"

 

Button

 CUFF  

       " 

"

 

Button

35. It cannot be maintained or repaired during normal use

.

36. The service life of the product is about 5 years, the service life of the cuff is about 2 years, and the battery is about 3 months.

1~

2cm 

(0.

4~

0.8 i

nc

h) 

22~

36c

m

8.6

~14

.2 i

nch

)

Main  

Art

ery

LEF

T

 

AR

M

IN

DE

X

Summary of Contents for BM 92











Reviews: