Important Testing Guidelines
8
10
9
1.
2. Sit in a calm environment for at least 5 minutes prior to testing.
3. Do not stand while testing. Sit in a relaxed position while keeping your arm level with
your heart.
4. Avoid speaking or moving body parts while testing.
5. While testing, avoid strong electromagnetic interference such as microwave ovens and
cell phones.
6. Wait 3 minutes or longer before re-testing.
7. Try to measure your blood pressure at the same time each day for consistency.
8. Test comparisons should only be made when monitor is used on the same arm, in the
same position, and at the same time of day.
9. This blood pressure monitor is not recommended for people with severe arrhythmia.
:
1. The position of the subject, his or her physiologic condition;
2. The performance and accuracy of the device;
3. Cuff size: too small cuff (bladder) will produce a higher blood pressure value than usual,
too big cuff (bladder) will produce a lower blood pressure value;
4. Measuring position does not keep level with your heart;
5. Speaking or moving body parts while testing;
6. Not relaxing for about 5 minutes before taking the measurement.
Avoid eating, exercising, and bathing for 30 minutes prior to testing.
10. Do not use this blood pressure monitor if the device is damaged.
Any blood pressure recording can be affected by the following factors
Quick Start
1. Before first use, please carefully check the packaging is complete, if not complete please
contact the seller for replacement. Every time before use, please check the equipment for
obvious damage, if there is equipment has been damaged, please use caution. In turn open the
color box, asylum package (or receive bag), remove the blood pressure monitor, check whether
the parts is complete, and install the batteries (as shown in figure A) battery installed, normal
blood pressure monitor for power self-checking, if the battery power is insufficient, the screen
shows "LO" error code, if the battery is normal, the device automatically after about 3 seconds
time date set into the interface. After the setting, can enter the blood pressure measurement mode.
(See Figure A )
3. Remove thick clothing from the arm area.
4. Rest for several minutes prior to testing. Sit down in a quietplace comfortably ,
back and arm support on a desk or table ,withyour legs uncrossed ,your arm
resting on a firm and your feet flat on the floor. (See Figure C )
5. Apply cuff to your left arm and middle of the cuff at the level of your heart. Bottom
of cuff should be placed approximately 1-2cm (1/2'') above elbow joint. (See Figures D&E)
1-
2cm
''
(0.
4-
0.8
)
Unit Operation
Battery Installation
Slide battery cover off as indicated by arrow.
Install 4 new AAA alkaline batteries according to polarity.
Close battery cover.
Figure C
Figure A
Figure D
Figure E
6. Press " START/STOP " Button to start testing.
Figure B
Unit Illustration
7
Contents
3.Arm Cuff
2.Owner's Manual
1.Monitor Unit
Owner's Manual
Arm-type Fully Automatic
Digital Blood Pressure Monitor
Model
BM 92
Arm Type
4.Storage Bag
Display
1~
2c
m (
0.4
~0
.8 i
nc
h)
22~
36c
m
（
8.6
~14
.2 i
nch
)
Main
Art
ery
LEF
T A
RM
IN
DE
X
Battery Indicator
5
.
Battery
2. Insert cuff air plug into the behind side of monitor unit. (See Figure B)
HSD