Joyner TROOPER-T2, Owner'S Manual

Page: 26 / 225

26
Is your vehicle ready to drive?
Before each drive, it is important to inspect your TROOPER and make sure any
problems you find are corrected. A pre-drive inspection is a must, not only for safety, but
because having a breakdown, or even a flat tire, can be a major inconvenience.
If your TROOPER has overturned or has been involved in a collision, do not drive it until
your TROOPER has been inspected by your dealer. There may be damages or other
problems you cannot see.
Improperly maintaining TROOPER or failing to correct a problem before driving
can cause a crash in which you can be seriously hurt or even dead.
Always perform a pre-drive inspection before every drive and correct any
problems.
Pre-drive Inspection
Check the following items before you get on TROOPER:
■
Engine Oil
Check the level and add oil if needed. Check for leaks.
■
Coolant
With the engine cold, check the coolant and add if needed. Check for leaks
■
Fuel
Check the level and add fuel if needed. Also make sure the fuel cap is securely
fastened. Check for leaks.
■
Tires
Use a gauge to check the air pressure. Adjust if needed. Also look for signs of
damages or excessive wear.
■
Nuts & Bolts
Check the wheels to see that the axle nuts are tightened, Use a wrench to make sure
all accessible nuts, bolts, and fasteners are tight.
■
Underbody & Exhaust System
Check for, and remove any dirt, vegetation or other debris that could be fire hazard or
interfere with the proper operation of TROOPER.
■
Air Cleaner
Check the air filter. Replace it if needed.
■
Leaks, Loose Parts
Walk around your TROOPER and look for anything that appears unusual, such as a
leak or loose cable.