Joyner JNSZ800MV, Owner'S Manual

Page: 31 / 131

3. Parking Adjustment
Pull the park brake lever up so that the unit can engage park brake. To release the unit,
press button on front end of parking lever then push the parking lever to the bottom. Adjust
the parking cable if necessary. (See figure 13)
4. Break-in
The first month is most important in the life of your vehicle. Proper operation during this
break-in period will help assure maximum life and performance from your new vehicle. The
following guidelines explain proper break-in procedures.
4.1. After the engine starts, the engine is not allowed in high speed in the neutral gearshift.
4.2. Drive vehicle from stop to low speed slowly.
4.3. Avoid braking strongly.
4.4. Do not exceed the vehicle speed on the below schedule.
The speed of vehicle The first 1000 km
Max speed in each gear
1
st
Gear 25km/h
2
nd
Gear 45km/h
3
rd
Gear 70 km/h
4
th
Gear 90km/h
5. Shock Absorber Adjustment
After a long time of use, it is necessary to adjust the spring as following: (See figure 14)
5.1. Loosen the lock nut with a shock absorber wrench (by Joyner);
5.2. Screw the stop-nut clockwise, and the tension of shock spring will increase; decrease
as screw to left.
5.3. If necessary, inflate with nitrogen, control the pressure lower than 0.8MP /116PSI.
Clockwise
Lock nut
stop nut
FIGURE 13
FIGURE 14
NUT #1
NUT #2