REPAIR
7. Check the spark timing. Adjust if need as followings
1. Loosen the nut of the distributor housing
2. Turn the distributor slowly. Increase the spark timing by counterclockwise turn.
Decrease the spark timing by clockwise turn.
F. Front Wheel Alignment
a.
Put the vehicle on level ground.
b. The “toe-in” of the front wheels should be 1.18 inches. To check for alignment,
measure distance A and B between the centerline (CL) of the wheels. The proper
toe-in dimension A should be 1.18 inches greater than dimension B.
c. To adjust the alignments, loose the lock nuts on both sides of Front Tie Rods. To
make Dimension B smaller, turn the rod to the left. Turn the rod to the right to make
Dimension B larger. After adjusted to desired length, tighten the lock nut against the
rod end. Recheck the dimensions for proper alignment.
36
Summary of Contents for JNSZ650DL
Page 39: ...WIRING DIAGRAM 38 ...
Page 40: ...39 ...
