Joyner JNSZ650DL, Owner'S Manual

Page: 28 / 40

you’ll need to remove rear suspension, driven shaft, clutch cable, muffler, wires
and rubber cushion that is in the middle of transmission and frame.
1. Remove bolt M14 ( See Fig. 22 )
Figure 22
2. Remove two bolts (M12) on the starter ( See Fig. 23 ), Remove the starter ( See Fig.
24 )
Figure 23 Figure 24
REPAIR
3. Remove two nuts (M14) on two side of transmission ( See Fig. 25, 26 )
27