Joyner JNSZ650DL Owner'S Manual Download Page 2

Page: 2 / 40

FOR OFF-ROAD USE ONLY

This vehicle is designed and manufactured for off-road use only.

USA only;

It does not confirm to federal motor vehicle safety standards, and operation on public streets,

roads, or highways is illegal

JNSZ650DL Limited Warranty

The warranty policy applies to those cases where the new seller vehicle is unloaded

from its shipping container, set up and delivered by authorized dealer, and under normal

use and service is found to have defects in parts or workmanship under the following

terms and conditions. This warranty covers the engine and engine related components

for a period of 90 days.

This warranty does not apply to any part, which in opinion of seller was defective

because of improper maintenance, improper assembly, alterations, abuse, negligence or

accident.

Should warranty service be required on your JNSZ650DL during the 90 days warranty

period, please contact your nearest authorized dealer for repairs.

What is not covered under this warranty

This warranty does not cover any seller vehicle that has been subjected to:

This warranty does not cover any seller vehicle in any way so to adversely affect its

safety or reliability.

Renting

Disassembly, adjusting, or repairing of the vehicle in any way so as to adversely

affect its safety or reliability.

Competition or racing

The warranty does not cover loss of use of the seller vehicle, loss of time,

inconvenience, or other consequential damage which includes, but is not limited to,

loss or damage to persons or property or any expense of returning any damaged

units to the seller distributor or its authorized dealer.

Summary of Contents for JNSZ650DL









































Search results

Summary of Contents for JNSZ650DL

Reviews:

Related manuals for JNSZ650DL

Brands by name

Popular brands

Joyner JNSZ650DL, Owner'S Manual

Search results

Summary of Contents for JNSZ650DL

Reviews:

Related manuals for JNSZ650DL

Brands by name

Popular brands