12
the product with round beds and/or mattresses or water beds is not permitted.
WARNING: When the product is used in the “Co-Sleeping Mode” (fixing to the bed), it should always be
fitted to the long side of access to the bed. DO NOT fix the product to the head or bottom of the bed.
WARNING: to avoid death from the infant’s neck being caught on the top rail on the side that is next to
the parent’s bed, the top rail shouldn’t be higher than the parent’s bed mattress.
ASSEMBLY
Remove all parts from packaging and ensure all parts are present before starting assembly.
Open support structures to keep the cot stand on the floor (fig. 1-2).
Insert the central support structure into the two plastic pins located on the main support structure.
Fix the fabric lining to the central structure, by fastening the two Velcro pieces positioned at the bottom
of the lining (fig. 3-4).
Insert the storage basket into the 4 holes in the plastic placed on the feet of the main structure and hook
the press studs (fig. 5).
Position the mattress on the bottom of the crib.
At this point, the product is ready to be used in “crib mode”.
WARNING: always make sure that the side rail is raised, correctly attached and the zippers are completely
closed.
HEIGHT ADJUSTMENT (fig. 6)
The crib can be adjusted to 6 different height positions. To adjust the height, the setting button up and
adjust the crib to the desired position. Repeat this operation on the opposite side. The base of the crib
can be inclined slightly by adjusting the two sides to different heights.
WARNING! The crib can be inclined with a maximum variance of 2 positions between one side and the
other.
WARNING! The head of the child should always be positioned on the highest side.
CO-SLEEPING MODE (FIXING TO BED) - (fig. 7-8-9-10-11-12)
Open the side of the crib with the mesh window using the side zips and open them completely.
Press the removable tubular structure release button and remove partially on one side and then on the
other. Once this operation has been performed on both sides, fit the tube to the base of the crib.
In order to fix the crib to the parents bed use the pair of straps provided. Fix the buckles underneath the
crib on both sides. Next, fix the straps around the structure/ slats of the parent’s bed, from the bottom
towards the top and fasten the buckles below the crib to finish.
To secure the crib to the parent’s bed, pull the straps once again to make sure the crib is properly and
firmly secured to the parent’s bed.
WARNING! Use the crib with the tube lowered in co-sleeping mode only.
Move the crib close to the parent’s bed and check the height of the crib compared with the mattress of
the bed.
WARNING! The height of the parent’s mattress should always be more than that of the side support for
containment of the crib.
WARNING! In co-sleeping mode, the 2 legs of the crib should always be adjusted to the same height.
HOW TO REMOVE THE FABRIC COVER?
The crib and mattress have a fabric lining that can be removed and washed.
Remove the mattress and unfasten the Velcro straps on the bottom
Open the side zips on the crib side with the netting window, detach the tubes from both sides.
Open the zip along the top edge of the crib and completely remove the fabric cover.
