9. SUPPORT
If any questions remain open or problems arise after your purchase, we are
available by e-mail, telephone and with a ticket support system to answer
these.
E-Mail: [email protected]
Ticket-System: http://support.joy-it.net
Telephone: +49 (0)2845 98469 – 66 (10 - 17 o‘clock)
For further information visit our website:
www.joy-it.net
SIMAC Electronics GmbH
Pascalstr. 8 47506 Neukirchen-Vluyn
Published: 01.10.2020
8. DECLARATION OF CONFORMITY
Hereby, the Simac Electronics Handel GmbH declares that the radio
equipment type COM-VAX1030 and COM-VAX1100 are in compliance with
Directive 2014/53/EU. The full text of the EU declarations of conformity are
available at the following internet addresses:
www.simac-gmbh.de/CE/com-vax1030.pdf
www.simac-gmbh.de/CE/com-vax1100.pdf
Information on transmission power and frequency band of
COM-VAX1030:
Frequency band:
2412-2472 MHz
Max. transmisson power: 11,67 dBm
Information on transmission power and frequency band of
COM-VAX1100:
Frequency band:
2412-2472 MHz
Max. transmisson power: 11,67 dBm
In order to control the individual devices wirelessly, the address of your
display and that of the device you want to control must match.
1. To do this, connect the display to a voltage source.
2. Now open the menu by pressing the OK key.
3. Use the arrow keys to navigate to the ADR. menu item and press the OK key.
4. You can now select the address with the arrow keys.
5. To confirm the address, press the OK button.
If the wireless connection is successful, you should see the following symbol in
the upper left corner of your display:
