background image

 

7“ Display for Raspberry Pi 

Published: 01.07.2019  

Copyright by Joy-IT 

 

Our information and take-back obligations under the Electrical and Electronic Equipment 
Act (ElektroG)  
 

symbol on electrical and electronic equipment:

 

 
 

 
This crossed-out dustbin means that electrical and electronic equipment does not belong in household 
waste. You must return the old devices to a collection point.  
Before disposal, you must separate old batteries and accumulators which are not enclosed in the old 
device from it.  
 

Return options: 

 

As an end user, you can dispose of your old device (which essentially fulfils the same function as the new 
one purchased from us) free of charge when purchasing a new device.  
Small appliances where no external dimensions are larger than 25 cm can be delivered in normal 
household quantities, irrespective of the purchase of a new appliance.  
 

Possibility of return at our company during opening hours: 

 

Simac Ltd, Pascalstr. 8, 47506 Neukirchen-Vluyn, Germany  
 

Possibility of return in your area: 

 

We will send you a parcel stamp with which you can return the device to us free of charge. Please contact 
us by e-mail at [email protected] or by phone.  
 

Information about packaging: 

 

If you do not have suitable packaging material or do not wish to use your own, please contact us and we 
will send you suitable packaging.  

 

 

 

5.  OTHER INFORMATIONS 

Summary of Contents for RB-LCD7.2









Reviews: