7“ Display for Raspberry Pi
Published: 01.07.2019
Copyright by Joy-IT
3
Dear customer,
thank you for choosing our product. In the following we have listed what has to be considered during
commissioning.
The easiest way to use the 7" display on your Raspberry Pi is to install our modified Raspbian image. Here
we have already made all necessary settings and configurations for you.
If you prefer a manual installation on your already installed Raspbian system, you can skip this step and
continue with the next chapter.
Download the current preinstalled image from our website
You can transfer the unpacked system image to your SD card with a suitable program (e.g. Etcher).
After successful transmission, the SD card can be inserted into the Raspberry Pi and the system can be
started. The display and system are now ready for use.
1. INTRODUCTION
2. IMAGE-INSTALLATION
