7
Jøtul Chimney system
Getting started
Chimney sign
When the installation of the system’s chimney is complete, one chimney sign
(label) must be attached to the upper part of the chimney. The other can be
glued into this installation guide and kept with your household paperwork.
Two chimney signs are included in the installation kit. The installation date
must be indicated on the label.
Using the fireplace for the first time
It is common for an odour to arise the first time you use the fireplace. This is
due to the burning of residues of e.g. paint, grease and other substances from
the manufacture of the fireplace. In the same way, the chimney’s pipe insu-
lation gives off an odour the first few times. These odours normally disappear
after your new fireplace has been used a few times.
Climbing arrangements
If pipe's outlet is
higher than 1.2 m
at the point where you climb up, a work platform or a module must be
installed with a sweeping hatch according to the same dimensions. This solution may only be used in the case
of a round, external pipe above the roof.
1,2 meter
0402
NVI, Näldenvägen 40, SE-835 40 Nälden
04
0402-CPR-265403
NVI20151000 & NVI20151001
SS EN 1856-1
Flerväggig systemskorsten av metall
NVI 2000 & NVI 2000 Combi: SS EN 1856-1:2009 T450-N1-D/W-V2-L50100-G50
MONTERINGSDATUM
Tryckhållfasthet
: Maximalt 20 m skorstenssektioner
Flödesmotstånd
: 0,15µm
Värmemotstånd
: 0,40 m²K/W vid T450
Resistens mot soteld
: Godkänd
Böjhållfasthet
: 2 m
Draghållfasthet
: 0,6 kN
Icke vertikal installation
:
Maximalt 1,5 m mellan fästpunkter 15°-90°
Hållfasthet för vindlast utomhus
:
Maximalt 1,8 m fristående över tak utan stag
Resistens mot frysning/upptining
: Godkänd
GETTING STARTED
1.2 metres