18
ENGLISH
Fig. 12
A
C
D
B
1. Remove the lower cover
(Fig.12 A)
.
2. Fit the decorative frame over the door and hook it over the
front
(Fig. 12 B)
.
3. Attach the trim panel with the same screws as those used
for the lower cover
(Fig. 12 C)
.
4. Remove the M8 screw provided
(Fig. 12 D)
.
Fig. 12.2
NB! Before use,
open the door and remove the screw (fi g. 12 .2- A)
Fig. 13
1.
ca.
15mm
4 psc. M10x35
B
A
Centre the insert laterally.
2. Position the insert and the frame against the front of the
surround.
3. Make sure that there is clearance between the lower edge
of the frame and the stone below
(Fig. 13 A)
by adjusting
the foot screws
(Fig. 13 B)
.
4. Adjust the foot screws until the insert is perfectly level.
Fig. 14
A
1. Use
bracket 5
(Fig. 14 A)
on layer 3 and 4.
2. Adjust the brackets with bare hands if necessary to make
them hold the stones together.
Summary of Contents for FS 166-I 570
