14
ENGLISH
Fig. 18b Replacing the exhaust de
fl
ector
A
2. Loosen the screw (A) that holds the topplate in place. This must
be done from the inside of the burnchamber.
Fig. 18c Replacing the exhaust de
fl
ector
180
o
3. Lift the top, turn it 180 degrees and place it on a
fl
at underlay.
NB:
It is important that the underlay is soft, so that the surface
is not damaged.
Fig. 18d Replacing the exhaust de
fl
ector
4. Loose the 4 screws that secures the exhaust de
fl
ector to the
top.
5. When re
fi
tting, follow the same procedure in reverse order.
7.3 Replacing the burn plates
Fig. 19a Replacing the rear burn plate
1. Loosen the rear burn plate by unscrewing the screws as shown
in the
fi
gure. The screws are continuous and have nuts on the
back of the stove. (see
fi
g.19b)
Fig. 19b
