GOJOTTO.COM
877-455-6886
4
PRODUCT CUSTOMIZATION:
(continued from page 3)
4.) Slide both Side Trays inward until the Side Clamps come in
contact with the sides of the laptop, making sure that the Side
Clamps fi t over the laptop edge. Please note: There may be a
small space in between the Side Clamp and laptop surface.
NOTE: If the Side Clamps on
your A-MOD Desktop do not
slide over the edge of your laptop, you can request an alternate
set of Side Clamps from Customer Service at 877-455-6886. Once
received, use the steps below to install your new Side Clamps. If the
Side Clamps already fi t properly, move on to step 5.
4.1) Locate the adjustment screw for each Side Clamp. Remove the
lug by loosening the screw with the provided L-shaped Wrench.
4.2) Using the New Side Clamps, install one New Side Clamp into
each the slots that the Original Side Clamps were in previously.
Tighten the screws. Ensure that all Side Clamps slide over the top
edge of your laptop before moving to step 5.
