LED screen
Possible faults
Possible steps
LED 4 is green
Battery pack is
overcharged
Remove the battery pack from the battery charger and install in
the product. Operate the product. Battery charger may be de-
fective. Speak to an approved service center.
LED 1 is red and LED 2 is
green, battery pack does not
charge or operate correctly in
product
Battery pack failure Remove battery pack from the product. Do not charge. Battery
pack is damaged and must be replaced. Speak to an approved
service center.
RED LED comes on, LED 2
is green and flashes during
charging or when the battery
pack is in the battery charger
Internal battery
tempature is too
low or too high for
charging
Move the battery charger and battery pack to a location where
the internal temperature of the battery pack can be between
5°C (41°F) and 45°C (113°F).
RED LED flashes and LED 2
flashes green when the bat-
tery pack is installed.
Internal battery
temperature is too
low or too high
The internal temperature in the battery must be between -15°C
(5°F) and 70°C (158°F). The environment temperature in the
battery pack is too low or too high.
• If the battery pack is too cold from the ambient environ-
ment, move the battery pack and battery charger to a warm
environment.
• If the battery pack is too hot, especially after operation,
move the battery pack and battery charger away from the
hot environment.
TECHNICAL DATA
unit
HT2258 Li (BHT58VJN)
Motor specifications
Motor type
Brushless
Motor voltage
V (DC)
58
Motor power
W
400
Battery and charger specifications
Default battery pack type
140Li
Default battery charger type
275Ci
Noise and vibration data
Equivalent vibration level (ahv, eq) front handle.
See Note 1.
m/s
2
2.497
Equivalent vibration level (ahv, eq) rear handle.
See Note 1.
m/s
2
2.884
Sound power level, guaranteed (LWA). See Note
2.
dB(A)
96
Sound power level, measured. See Note 2.
dB(A)
94.95
Sound pressure level at operator's ear. See Note
3.
dB(A)
84.06
10
668 - 002 - 13.06.2018
