Jonsered GR 2026CL, Operator'S Manual

Page: 3 / 32

English
– 3
CONTENTS
Contents Note the f ollowing before starting:
Please read the oper ator’s manual carefully.
Maintenance, replacement, or repair of the emission control
devices and system may be performed by any nonroad
engine repair establishment or individual.
This label certify that the product has been certified in
accordance with American exhaust requirements EPA 1.
KEY TO SYMBOLS
Symbols ....................................................................... 2
CONTENTS
Contents ...................................................................... 3
Note the following before starting: ................................ 3
INTR ODUCTION
Dear customer! ............................................................ 4
WHA T IS WHAT?
What is what? .............................................................. 5
GENERAL SAFETY PRECA UTIONS
Impor tant ...................................................................... 6
Personal protective equipment ..................................... 6
Machine
′
s safety equipment ........................................ 7
Cutting equipment ........................................................ 9
ASSEMBL Y
Fitting the loop handle ................................................. 10
Assembling the cutting equipment ............................... 10
Fitting the trimmer guard and Auto 32 trimmer head ... 10
Fitting other guards and cutting attachments ............... 11
Assembling and dismantling the two-piece shaft (GR
2026CL) .......................................................................
11
FUEL HANDLING
Fuel saf ety ................................................................... 12
Fuel .............................................................................. 12
Fueling ......................................................................... 13
ST ARTING AND STOPPING
Chec k before starting ................................................... 14
Starting and stopping ................................................... 14
W ORKING TECHNIQUES
Gener al working instructions ....................................... 16
MAINTENANCE
Carb uretor .................................................................... 18
Muffler .......................................................................... 19
Cooling system ............................................................ 20
Bevel gear .................................................................... 20
Air filter ......................................................................... 20
Spark plug .................................................................... 21
Two-piece shaft ........................................................... 21
Maintenance schedule ................................................. 22
TECHNICAL D ATA
T echnical data .............................................................. 23
FEDERAL EMISSION CONTR OL WARRANTY
STATEMENT
Y OUR WARRANTY RIGHTS AND OBLIGATIONS ..... 24
!
W ARNING! Long-term exposure to noise can
result in permanent hearing impairment. So
always use approved hearing protection.
!
W ARNING! Under no circumstances may the
design of the machine be modified without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
Your warranty may not cover damage or
liability caused by the use of non-authorized
accessories or replacement parts.
!
W ARNING! A clearing saw, brushcutter or
trimmer can be dangerous if used
incorrectly or carelessly, and can cause
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of this
operator’s manual.
IMPORTANT ENGINE INFORMATION TWC
JONSERED HUSKVARNA SWEDEN
REFER TO OPERATOR`S MANUAL FOR
MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
FOR SMALL NON - ROAD ENGINES.
EP THIS ENGINE CONFORMS TO U.S. PH1 A