JS-3 Jet Sustainer
Flight Manual Supplement
JS03-AFM-00-002
Issue: 00.32JS
Rev. 00.32JS
Rev. Date: 08.02.2019
Page 8
–7
8.5.2.5
Fuel level calibration
Fuel probe calibration is done via
the “Fuel
Probe Cal
” screen. A 10-bit digital value
displayed in brackets (692d) represents
the measured fuel level from the fuel
probe (0 is empty, 1024 is full).
When rotating the Thrust Control Dial, the d-value is updated from the
fuel probe.
Calibration of the fuel pressure sensor is explained in the Jet Sustainer
Maintenance Manual Supplement (JS03-AMM-00-002) and must be
completed by an approved person.
NOTE
:
The fuel pressure sensor value is only measured if the
“Quantity Determination” in the “Fuel Configuration” page
is set to “Probe” or “Probe and Calculation”.
