13
JO
NIX
VMC
The device
JO
NIX
VMC
is designed to be secured directly onto the surface in contact with the air
to be treated, using the appropriate eyelets. For this reason, a rectangular hole must be provided
on this surface, the M3 threaded hexagonal inserts for fixing the screws and the holes for the
passage of the tabs, as indicated in the dimensional drawing attached to the device.
6.4 INSTALLING THE DEVICE
WARNING!
Using power supply that does not meet the requirements requested by the device
could resolve in damaging the device or part of it.
• The electrical connections must be carried out following the instructions provided in this
manual.
• Make sure that voltage and frequency of the electric line correspond to those provided on
the name plate.
• The electrical mains of the
JO
NIX
VMC
device must be used for the device only, there must
be no other devices powered by the same power line. Do not use adapters, power strips and/
or extension cords.
• Make the connection with cables with a suitable cross-section and in compliance with local
standards.
• The installer must see to it to assemble the device as close to the power disconnector as
possible, according to standards in force and as far as necessary to protect the electrical parts.
6.5 ELECTRICAL CONNECTIONS
ATTENTION! BEFORE STARTING ANY OPERATION, MAKE SURE THAT THE MAIN
POWER SUPPLY IS DISCONNECTED!
