3
Helpful Hints
ASSEMBLY IS REQUIRED -
READ THE DIRECTIONS BEFORE ASSEMBLY
• This product requires some assembly before use. See “Assembly” section for instructions. Because of
the weight and size of the New American Lawn Deluxe Rotary spreader, it is recommended that
another adult be present to assist with the assembly. INSPECT ALL COMPONENTS closely upon
receipt to make sure no components are missing or damaged.
• Read this owner’s manual before operating the equipment. Familiarize yourself with the location and
function of the controls and features. Save this manual for future reference.
• If your spreader does not spread evenly, be sure the FRONT on the gear box points to the front of
the spreader. The impeller must turn clockwise. Reversing the gear box will cause the impeller to turn
counter clockwise. Clean the impeller plate after each use. Fertilizer stuck on the impeller blades will
cause uneven spreading.
• Your spreader is designed to be pushed at three miles per hour, which is a brisk walking speed.
Slower or faster speeds will change the spread patterns. Wet fertilizer will also change the spread
pattern and flow rate. Clean your spreader thoroughly after each use. Wash between the shut off
plate and bottom of the hopper.
• Gears are permanently lubricated at the factory. Do not open the gear box or dirt may enter.
Remove and identify loose parts from carton and bag.
Hex Bolt
M5x45
1 piece
Hopper Assembly
1 piece
Wheel
2 pieces
Upper Handle
2 pieces
Handle
1 piece
Gauge & Lever
Assembly
1 piece
Hopper
Screen
1 piece
Rain Cover
1 piece
Control Rod A
1 piece
Pivot & Bracket
1 piece
Lock Nut M5
1 piece
Flat Washer
Ø6
3 pieces
Handle
Spacer
1 piece
End Cap
2 pieces
Nylon Washer
4 pieces
Flat Washer
Ø16
1 piece
Lock Nut M6
7 pieces
Hex Bolt
M6x45
5 pieces
CAUTION
Read and follow all instructions for assembly and operation. Failure to properly assemble this
equipment could result in serious injury to the user or bystanders, or cause equipment damage.
