10
Maintenance and Storage
WARNING
Improper maintenance and storage of this spreader may void your warranty.
Maintenance
• After each use clean material out of hopper.
• Rinse/dry inside and outside of the spreader after each use.
• Before operating make sure the tires have the RECOMMENDED TIRE PRESSURE 25 PSI.
• Periodically check all fasteners for tightness.
• Annually clean and lightly lubricate parts.
• Use a glossy enamel spray paint to touch up scratched or worn painted metal surfaces.
• Never exceed load capacity rating, it will damage the spreader.
IMPORTANT
WARNING
The warnings, cautions, and instructions outlined in this instruction manual cannot cover all
possible conditions or situations that may occur. It must be understood by the operator that
common sense and caution are factors which cannot be built into this product and must be
supplied by the operator.
Storage
• Never allow material to remain in the hopper for extended periods of time.
• Before storing make sure the spreader is clean and dry for years of trouble free service.
• Store indoors or protected area during severe weather and winter months.
The manufacturer reserves the right to make improvements in design and/or changes in specifications
at any time without incurring any obligation to install them on units previously sold.
