Secure the bearing (12) and the bearing pin (13) into
the aperture of the protection cowl (11) in place as
shown in the illustration.
1.
Insert the internal components assembly with the
hexagonal end part of the upright axle (2) facing
upwards into the bearing bore located in the internal
side of the protection cowl (11) and secure it in place
with the compression spring using the hexagon screw
(15).
The completed hole cutter assembly should resemble
the illustration shown opposite.
1.
2.
The completed assembly of the external components
should resemble the illustration shown opposite.
2.
EXTERNAL COMPONENTS
ASSEMBLY INSTRUCTIONS
HOLE CUTTER ASSEMBLY INSTRUCTIONS
Summary of Contents for AHC-10
Page 1: ...MANUAL AHC 10 ADJUSTABLE HOLE CUTTER...
Page 8: ......
