The drill, cutting blade, cutter holders and the transverse axle must be fixed tightly and securely with
screws while cutting.
Adjust the cutting size by confirming that the inside plane surfaces of both the right and left side
cutter holders (8) must be aligned with the same graduation and both of the right and left screws (9)
must be fixed tightly and securely before you start cutting.
I there is any noise or vibration during operation, check whether the screws have loosened.
After operation, the bearing (12) and upright axle (2) must be cleaned.
1.
2.
3.
4.
WARNINGS
Summary of Contents for AHC-10
Page 1: ...MANUAL AHC 10 ADJUSTABLE HOLE CUTTER...
Page 8: ......
