background image

11

ENGLISH

 CHAP.04  ECOLOGICAL  REGULATIONS

 

04.1 

WASTE MATERIALS AND THEIR DISPOSAL

Spare parts replaced during the machine’s product life are to be considered waste and must be taken to special collection centres or 

entrusted to authorised disposal centres. 

Ashes must be placed in a metal container with a sealed lid. The closed container must be placed on a non-combustible base and kept 

away from combustible materials until all the embers have been extinguished.

Only when extinguished can ashes be thrown into the organic waste collection, naturally without nails or other non-organic materials.

Only when extinguished can ashes be disposed of according to the recycling regulations in your town. 

The ashes from natural wood (untreated) derived from stove or fireplace combustion are mainly composed of calcium, silicon, potassium 

and magnesium oxides.

Danger of environmental pollution

Adopt positive civic behaviour and DO NOT disperse the packaging into the environment, but take it to waste disposal 

centres for recycling.  All packaging can be recycled, as it consists of wood, polyethylene film, polystyrene and cardboard

WARNING

PROTECT THE ENVIRONMENT!!!!

 

04.2 

DISPOSAL OF THE MACHINE

The machine is mainly composed of ferrous materials, but it may also contain:

• 

piping

• 

insulating materials

• 

electrical parts etc.

• 

refractory materials

When you no longer intend to use the stove ever again, do not dispose of it irresponsibly. Remember to:

• 

empty the circuit completely (if present)

• 

remove piping (if present)

• 

remove plastic parts

• 

remove electric cables and electric components

These materials must be disposed of by specialised firms or according to the laws of the country where it is installed.

Furthermore:

• 

immobilise moving parts

• 

make the locks on the doors inoperativ

Take the remaining part of the stove to the firms that dispose of ferrous materials.

The machine must be disposed of in a manner that complies with the laws in force and the environment.

When taking it to the firms that dispose of ferrous materials, handle the stove as described in 

CHAP.03 - HANDLING 

AND TRANSPORT.

NOTE

Summary of Contents for Foghet EVO Aria L 12 kW













































Reviews: