24
CHAP. 06 - POSITIONING AND CONNECTIONS FOR THE INSTALLER
06.2 PHASES OF ASSEMBLING/DISASSEMBLING STOVE CLADDING
The stove is delivered in a polys car polythene packaging on a pallet with the boiler body and cladding disassembled,in
case of ceramic.
The various elements of the cladding must be handled carefully, as being satin-finished, polished or painted, they could be
scratched or dented during the moving or assembly phases.
NOTE!
The flue must be installed so that it can be disassembled for cleaning or removing the cladding itself.
The below assembly directions must be obligatorily followed, after having carried out the various connections.
1
To
assemble
the cladding, follow the numbering from
1
to
4
.
To
disassemble,
work in the opposite order.
1
2
3
4
Assemble the side of the frame (
1DX
and
1SX
) on the base
with its own nuts.
Assemble the door screen (
2
) and the upper frame (
3
) on
the side frames with the nuts provided
Assemble the side edges (
4DX
and
4SX
) on frames with
bolts supplied
Assemble the side panels (
5DX
and
5SX
) on the side fra-
mes by putting the tabs into the appropriate seat and clo-
sing the rear door with nuts on.
1
A
2
Model:
TECHNA
Type:10kW/15kW
Model:
CLASSE
Type:10kW/15kW
1
1
1
To
assemble
the cladding, follow the numbering from
1
to
2
.
To
disassemble,
work in the opposite order.
1
2
Assemble the lateral tiles (
1
) (8 identical pieces) sliding
them onto the guide frame
Assemble the top (
2
) inserting the pins in the appropriate
slots (
A
) and pushing it forward until it locks.
1
1
1
A
1DX
1SX
3
2
4DX
4SX
5DX
5SX
