Jolly Mec AMBRIA2, Instructions For Installation, Use And Maintenance Manual

Page: 32 / 36

32
Device cleaning and maintenance schedule chart.
Description Daily Weekly Monthly Annually As
necessary
Stove body cleaning
U
Brazier removal for cleaning
U
Ash pan removal and cleaning
U
Fume inspection cleaning
U
Pellet tank cleaning
U
Glass cleaning
U
Cleaning the cladding
U
Remove the flame-breake
U
Cleaning of the flue
T
Stove fume pass cleaning
T
Cleaning of any deposits in the stove
T
Cleaning of fans
T
Check good ignition resistance
operations
T
Check electric/electronic system
integrity
T
Check safety device, thermostat and
pressure switch status and efficiency
T
Check the condition of the sealing
gaskets, paying special attention to the
one on the closure of the combustion
chamber door.
T
Check the condition of the ceramic
glass.
T
Check the pellet loading gear motor is
working properly.
T
Clean the bottom of the pellet hopper.
T
KEY: U: routine maintenance by the customer user
T: extraordinary maintenance by a specialised Technical Service Center
Time between one cleaning and the next is strictly tied to fuel quality and also the device’s operating time. The
most suitable cleaning frequency can only be established a few days after use according to the actual amount of deposited
residue and may vary from the intervals imposed by Jolly Mec.
NOTE